Russell Hobbs Allure Espresso Machine Review

As a coffee lover, I was excited to be sent an Allure Espresso Machine to review from Russell Hobbs.  The brushed stainless steel and black finish is elegant as well as easy to keep looking clean & stylish.

This compact machine packs a whopping 15 bar pressure through its' pump and comes with a measuring spoon/coffee grounds tamper as well as both a single and a double espresso coffee grounds holder.

They've thought of everything a coffee maker needs, so you can find a cup holder/warmer on top of the machine.

The machine incorporates a 1.5 litre on board water tank which you can either fill in situ, or remove and fill from the tap.  It's capable of making espresso, latte or cappuccino coffees as well as being used as a hot water facility or just a milk frother for your hot chocolate drink.

 

Using the machine couldn't be easier either.  Simply select whether you're going to make one or two cups of espresso, and place the relevant holder into the handle.  Scoop one/two spoons of your coffee into the holder and gently tamp it down, making sure to clean off any stray coffee grounds from around the edges of the holder, to ensure a good seal to the machine.  It's also able to work with the ESS coffee pods that you can buy. In this case, just ensure that you do not leave any of the paper frill outside the holder that would prevent the seal being made to the machine.

Lining up the handle with the left hand corner of the machine, insert the handle into the base of the coffee machine so the lugs slot into place.

Turn the handle to the right until it's at right angles to the front of the machine.

Switch on the machine using the bottom rocker switch.  You will hear a noise initially as the 15 bar compressor starts up. 

Place your cup(s) on the drip tray underneath the nozzles. Turn the top rocker switch to the 'two drip' (water) setting and rotate the large centre switch to the right towards the image of the cup & saucer.

Fill your cups to approx 1/3 full.  Rotate the centre switch back to the left to the 'X' to stop the flow of water.  Your machine will continue to purge the water held in the system.

Rock the top switch to the left towards the steam icon.  Place a tall jug of milk under the frother arm & rotate the centre switch to the left towards the two drip/steam icon.

Making sure you keep the frother nozzle under the surface of the milk, allow the steam to go through it, which both heats and froths it.

From my finished cappuccino below, I'm sure you can understand why the barristers of this world are in no way worried about their job being stolen by me when you can see my attempt at 'coffee art'!

To clean the machine couldn't be easier either.  Pull off the black milk frother attachment.  Be aware that this may still be hot, depending on how long it's been since you made your coffee.  Wipe the stainless steel frother tube to remove any milk residue.

Pull the drip tray forwards.

Lift the drip tray grill.

Remove the insert at the back of the drip tray, pulling it forwards and then upwards.

Wipe over the base with a damp cloth.

I was recommended to try Lavazzo coffee by an Italian friend of mine & I'm glad that I did.  It's a rich coffee which produces a lovely smooth crema on your espresso and works perfectly with the Russell Hobbs Allure Espresso machine.

The machine is simple to use but I found that I needed to hold my coffee cup in position when making it as the powerful compressor has a habit of vibrating the cup away from underneath the outlets.  It's not a silent machine either due to the power, but then again, I didn't expect it to be; it's not overly noisy or offensive sounding and certainly wouldn't deter me from using it.  It's simple to clean and doesn't take long to get it ready for your next drink.

Would I be disappointed with this machine if I'd bought it?  No, I wouldn't.

Would I recommmend it to fellow coffee lovers? Yes, indeed I would.

The machine was kindly sent to me by the PR company of Russell Hobbs.  I have not been paid for this review and the views expressed are a reflection of how I found the machine during operation.